22kW IP55 Type 2 Tethered EV Electric Car Charging Pile AC Wallbox For Residential

The 22kW fast AC wallbox is the highest-power single-gun alternating current charger designed for shared residential and commercial car parks. It delivers a full workday recharge for larger electric SUVs and delivery vans without the cost of a direct current fast station. A tethered Type 2 cable hangs on an integrated holster, so drivers need not carry their own.

• 22kW output cuts charging time nearly in half versus an 11kW unit.
• Tethered cable and holster keep the bay tidy for the next driver.
• Smart fan switches on only under load, remaining quiet overnight.
• LED ring communicates charging state without the need to read a screen.

The three-phase power stage uses power factor correction, and a microprocessor negotiates with the vehicle through the control pilot line. Class A residual current detection reacts to both alternating and direct earth faults, and an optional meter board logs energy for cost allocation. The fan speed follows heatsink temperature, extending bearing life, and firmware updates are applied through a service port.

Property managers install these units in apartment visitor bays, shopping centre car parks, hotel porches and staff parking areas. They suit both left-hand drive and right-hand drive electric SUVs and vans used in West African cities. A three-phase feeder with adequate cable cross-section is required.

• Faster AC turnaround raises the number of cars served per bay per day.
• Tethered cable removes theft and cable mismatch risks in public parking.

We provide English installation and operation manuals, mounting templates and a commissioning checklist. Warranty covers power electronics for two years and fan and cable for one year. Technicians guide installers remotely over video, and spare contactors and meters are held for dispatch to West African ports.

Each production unit is burned in under load, tested for three-phase output balance and checked for earth continuity and leakage. The tethered cable is pulled and flexed to validate strain relief, and the enclosure is sealed to its rated ingress level.