100Ah Lithium LiFePO4 Battery Case Deep Cycle Mid Sized Energy Storage Block

The 24V 100Ah LiFePO4 battery pack is a mid-sized energy storage block designed for remote cabins, small telecom sites, and rural home solar systems. It delivers 2.56 kWh of stored energy at a common 24V voltage level that matches many small off-grid inverters and charge controllers. The rugged case includes carry handles for easy installation on a wall or rack shelf.

• 24V bus voltage suits small off-grid inverters.
• 2.56 kWh capacity stores enough energy for lights, a TV, and a refrigerator overnight.
• Built-in BMS with cell balancing extends pack life.
• Integrated handles and a rugged case simplify installation.

Eight 3.2V cells connected in series form the 25.6V nominal pack. The BMS monitors each cell string and the pack current. Balancing resistors bring cells to equal voltage during charging, and the board cuts output on over-voltage, under-voltage, or over-temperature conditions. Copper busbars handle the continuous discharge current, and the case is sealed against dust.

Rural households, clinics, and small businesses deploy this pack with rooftop solar panels in villages beyond the grid. Because the battery is stationary, it suits left-hand-drive and right-hand-drive regions equally. Typical loads include LED lighting, televisions, fans, and a small refrigerator.

• Deep-cycle LFP chemistry tolerates daily discharge without rapid wear.
• Long cycle life spreads replacement cost over many years.

Each pack is supplied with cables, mounting brackets, and an English manual. The warranty covers three years on the pack and two years on the BMS. Technical staff assist with selecting matching inverter and charge controller ratings, and spare packs can be consolidated into a container shipment.

Cells are sorted by internal resistance and capacity before assembly, and finished packs receive a full charge and discharge test. BMS protection thresholds are verified on every unit.