5.12KWh LiFePO4 Battery Box Power Pack 6000 Cycle CAN RS485 Communication
5.12KWh lifepo4 battery box
,6000 Cycle lifepo4 battery box
,CAN RS485 lifepo4 power pack
5.12 kWh LiFePO4 Battery Pack Solar Storage Battery with 6000 Plus Cycle Life and CAN RS485 Communication
The 48V 100Ah LiFePO4 battery pack is a standard building block for residential solar storage and small off-grid power systems. At 5.12 kWh and 51.2V, it matches common 48V hybrid inverters used in homes and small businesses. CAN and RS485 communication allow the inverter to read pack status and optimize charging.
- 51.2V bus voltage matches residential hybrid inverters.
- CAN and RS485 communication for inverter integration.
- 6000+ cycle life for daily solar cycling.
- Compact rack or floor-standing case.
Sixteen 3.2V cells in series form the 51.2V pack, and the BMS monitors each cell, pack current, and temperature. It communicates over CAN or RS485, sharing state of charge and fault flags with compatible inverters. The board supports active balancing and can be paralleled with identical packs to scale a home storage system.
Homeowners and small offices pair this pack with rooftop solar in West African towns and villages. It suits loads such as lights, fans, TVs, refrigerators, and phone charging. Multiple packs can be added later as the household grows, up to the inverter limit.
| Chemistry | LiFePO4 (LFP) |
|---|---|
| Nominal Voltage | 51.2V |
| Rated Capacity | 100Ah |
| Energy | 5.12 kWh |
| Cycle Life | 6000+ at 80% DoD |
| Continuous Discharge | 100A |
| Charge Voltage | 58.4V |
| Operating Temperature | -20°C to +55°C |
| Communication | CAN and RS485 |
| Weight | Approximately 42 kg |
- Communication integration means the inverter charges the pack optimally.
- Scalable architecture grows with household demand.
We provide communication cable pinouts, an English manual, and a compatibility list for common inverters. Warranty is three years on the pack and two years on the BMS. Our engineers help size parallel systems and configure inverter settings in English.
It works with most 48V hybrid inverters that support CAN or RS485 LFP communication. We share a compatibility list and can advise on specific models.
Yes, packs can be paralleled. Add them at similar state of charge and follow the parallel cabling guidance in the manual.
A single pack install with an existing inverter usually takes a few hours for a qualified technician.
Communication packs are tested with reference inverters to confirm handshake and data exchange. Cells are matched by capacity and resistance, and BMS thresholds are calibrated on every serial.
Outdoor 72V30Ah Lifepo4 LFP Battery Pack IP65 Dust Water Resistance
72V30Ah LFP Battery Pack with IP65 Dust & Water Resistance and Wide Temperature Range for Outdoor Use 1. LiFePO₄ Cells – Safe & Durable Equipped with LFP (lithium iron phosphate) cells featuring excellent thermal stability, they are non-flammable and non-explosive, deliver outstanding cycle life, ...
100Ah Lithium LiFePO4 Battery Case Deep Cycle Mid Sized Energy Storage Block
24V 100Ah LiFePO4 battery pack delivering 2.56 kWh for solar cabins and off-grid systems. Built-in BMS with cell balancing, 4000+ cycles, and rugged sealed case with handles. CE, UN38.3, RoHS certified. Includes cables, brackets, manual, and 3-year warranty.
Rackmount Lifepo4 Lithium LFP Battery Pack 51.2V 200Ah Customized
51.2V 200Ah rack mount LFP battery delivering 10.24 kWh for telecom tower backup. Features 6000+ cycle LiFePO4 cells, built-in BMS, CAN/RS485 and dry contact alarms. CE, UN38.3, RoHS certified; 19-inch rack design suits outdoor shelters. Reduces generator fuel costs and site visits.
Rugged Deep cycle LFP Lifepo Battery Pack 48 Volt 200Ah
Reliable 48V 200Ah LiFePO4 solar battery delivering 10.24 kWh with over 6000 cycles and built-in BMS protection. Certified CE, UN38.3, RoHS. Ideal for home backup, clinics, and shops. Stackable cabinet design, CAN/RS485 communication, and 3-year warranty with engineer support.
